Atom waveguide and 1D optical lattice using a two-color evanescent light field around an optical micro/nano-fiber

We propose a two-color scheme of atom waveguides and one-dimensional （1D） optical lattices using evanescent wave fields of different transverse modes around an optical micro/nano-fiber. The atom guide potential can be produced when the optical fiber carries a red-detuned light with TE01 mode and a blue-detuned light with HEll mode, and the 1D optical lattice potential can be produced when the red-detuned light is transformed to the superposition of the TE01 mode and HE11 mode. The two trapping potentials can be transformed to each other for accurately controlling mode transformation for the red-detuned light. This might provide a new approach to realize flexible transition between the guiding and trapping states of atoms.     

Ligand-receptor docking with the Mining Minima optimizer

The optimizer developed for the Mining Minima algorithm, which uses ideas from Genetic Algorithms, the Global Underestimator Method, and Poling, has been adapted for use in ligand-receptor docking. The present study describes the resulting methodology and evaluates its accuracy and speed for 27 test systems. The performance of the new docking algorithm appears to be competitive with that of previously published methods. The energy model, an empirical force field with a distance-dependent dielectric treatment of solvation, is adequate for a number of test cases, although incorrect low-energy conformations begin to compete with the correct conformation for larger sampling volumes and for highly solvent-exposed binding sites that impose little steric constraint on the ligand.     

Feigenbaum Scenario Exhibited by Thin Plate Dynamics

The dimensionless partial differential equations governing thedynamics of a thin flexible isotropic plate with an external load arederived and investigated. The period doubling bifurcations, as well asthe chaotic dynamics, are detected and analyzed. The algorithms leadingto the reduction of the original equations to those of a difference setof ordinary differential and algebraic equations are proposed, comparedto other known methods, and then applied to the problem.Among others, it is shown that, in spite of the system complexity, theFeigenbaum scenario exhibited by one-dimensional maps also governs theroute to chaos in the continuous system under consideration.     

柔性铰链微位移机构在可调谐F-P滤波器中的应用研究

分析了由于反射镜倾斜导致的可调谐F-P(Fabry-Perot)滤波器失谐。设计了一种柔性铰链式微位移机构,由压电陶瓷驱动,采用平行四连杆机构进行传动导向。采用该机构驱动F-P腔镜扫描克服了直接使用压电陶瓷带来的腔镜倾斜问题。该机构已应用于可调谐F-P滤波器中,输出信号多周期峰值幅度均匀,重复性好。     

SrTiO3/α-Fe2O3异质结光阳极光电转换性能

作为一类重要的光电极材料,α-Fe2O3在太阳能转化方面有着潜在的应用前景.但是,光生电子空穴对的再复合导致α-Fe2O3的光电量子产率很低.为了抑制光生电子空穴对的再复合,提高α-Fe2O3的光电量子产率,采用Spin-coating方法在透明导电玻璃FTO(SnO2:F)衬底上制备了SrTiO3/α-Fe2O3异质结薄膜光电极,并对该光电极进行了XRD、SEM、紫外-可见透射光谱的表征.在三电极光电化学测试系统中对薄膜的光电流-电压特性、入射光子电流转化效率(Incident photon to current efficiency,IPCE)对波长的依赖性进行了表征.在相同的Xe灯照射条件下,SrTiO3/α-Fe2O3异质结光电极的光电流及IPCE值大于单一的SrTiO3、α-Fe2O3各自的光电流及IPCE值,这与理论预测的结论一致.     

柔性ITO衬底电化学沉积制备Cu/Cu2O薄膜

研究了使用电化学沉积法于碱性条件下在柔性ITO衬底上制备Cu/Cu₂O薄膜的方法。循环伏安曲线表明Cu₂O与Cu的阴极峰分别位于-500 mV(vs Ag/AgCl)和-800 mV(vs Ag/AgCl)附近。利用循环伏安法考察了生长温度和电解液pH值等对Cu₂O与Cu阴极峰电位的影响,阴极峰随生长温度的升高以及pH值的降低而略向阳极移动,沉积电流也随之相应增大。与弱酸性条件相比,上述两个阴极峰随pH值升高而移动的程度明显减小,这可能与碱性条件下C₃H₆O电离程度增大以及C₃H₆O根作为配体的过量程度有关。通过X射线衍射光谱和扫描电子显微镜的表征证实,在所研究的生长温度区间和pH值内可利用电化学沉积法在柔性ITO衬底上制备Cu/Cu₂O纳米混晶薄膜。在相同的生长温度和pH条件下,电化学沉积电位对样品表面形貌和晶体性质具有较大影响。     

High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Substrates for flexible electronics: A practical investigation on the electrical,film flexibility,optical, temperature,and solvent resistance properties

Designing and developing flexible electronics requires a thorough investigation of the substrates available for the fabrication of devices. Here, we present a practical study on a variety of significant substrates: polyethylene terephthalate (PET), its heat‐stabilized (HS) derivative, HS‐PET, and polyethylene naphthalate (PEN) plastic insulating films; indium tin oxide (ITO)‐coated ITO/PEN and ITO/PET transparent conducting films; rigid ITO/glass and FTO/glass substrates; stainless steel and titanium foils. We put the substrates through a range of tests these actually undergo during device fabrication to determine their optical, mechanical flexibility (under different types of tensile and compressive stress bending with and without a PEDOT:PSS conducting polymer layer), solvent resistance, stability to temperature treatment (conductivity and deformation), and to UV irradiation. We highlight issues and propose solutions to improve substrate response. The results and thresholds extracted reveal limitations and windows of opportunity useful for the designer of flexible optoelectronics in determining manufacturing processes and the final applications under everyday operation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

The Chemistry of Cyborgs—Interfacing Technical Devices with Organisms

The term “cyborg” refers to a cybernetic organism, which characterizes the chimera of a living organism and a machine. Owing to the widespread application of intracorporeal medical devices, cyborgs are no longer exclusively a subject of science fiction novels, but technically they already exist in our society. In this review, we briefly summarize the development of modern prosthetics and the evolution of brain–machine interfaces, and discuss the latest technical developments of implantable devices, in particular, biocompatible integrated electronics and microfluidics used for communication and control of living organisms. Recent examples of animal cyborgs and their relevance to fundamental and applied biomedical research and bioethics in this novel and exciting field at the crossroads of chemistry, biomedicine, and the engineering sciences are presented.